Make sure they are clean and see how it goes. It may be a faulty sensor or reversing switch, but check to see that they are clean first. Posted by Dave_Retired. on 21 September 2011 | Relevance: 0.6
...I had to switch from reverse to neutral and back to reverse for each one, as the display only beeps and display goes off after a few seconds.
Posted by balloo on 15 March 2013 | Relevance: 0.6
...a (switched) fused live supply.
I'm not sure where the nearest such supply can be found - it is probably off the fuse box under the bonnet. Posted by BigJohnD on 27 October 2013 | Relevance: 0.6
There should be 1 more screw in the switch holder on the door card and that needs to come out as well, then it requires a hard pull starting at the bo... Posted by Dave_Retired. on 12 September 2015 | Relevance: 0.6
...u need to release the hand brake before changing pads, what i done on mine is just switch ignition on and release the handbrake. And do you job. Posted by don33 on 16 November 2017 | Relevance: 0.6
Go through the menu and switch off the auto hand brake function.
I changed mine a few months back, no problem if you have the right tools.
... Posted by Abacus on 29 May 2011 | Relevance: 0.6
... service was due. When it came out of warranty I switched to a local independent. At 5 yrs old he measured the disks and the wear was less than .025m... Posted by Jimux on 18 December 2016 | Relevance: 0.6
What happens when you remove controlling rear seats on AC control unit. But leave manually to the highest settings on the back controls? Posted by Ap0qalypto on 12 July 2022 | Relevance: 0.6
... I assume that economy mode shouldn't turn it off).
Certainly does on my 2007 car. It is also not controlled by economy mode either.
Posted by routemaster1 on 24 June 2010 | Relevance: 0.6
...unit fitted to the late 2016 facelift C4/GP has voice control (as the old pre 2013 model had) and also offers Mirrorlink and CarPlay as well. Posted by bluehdi on 14 January 2017 | Relevance: 0.6
Hiya, I have a 10 plate C4 coupe (by loeb).
Although this isn't quite what you want, I noticed that if I left my headlight switch in the 'sidelig... Posted by on 09 May 2010 | Relevance: 0.6
...the climate control on the left hand side now. Hopefully can be done through diagbox
If anyone know could they please let me know,
Thanks Posted by fezziemk4 on 13 December 2018 | Relevance: 0.6
...ains electrical connections to the steering wheel controls as the wheel is turned. It is usually a capsule containing a coiled flexible circuit. They ... Posted by niggly56 on 15 May 2016 | Relevance: 0.6
... the seatbelt mount. Have Managed to get it under control with the help of some heavy-duty sticky pads and some foam. Decided not to use the silicone ... Posted by Commodore on 28 September 2011 | Relevance: 0.6
...e to connect a USB device of some sort. You don't control the music from that device - you do it through the same panel you control the rest of the ca... Posted by Anhunedd on 15 July 2014 | Relevance: 0.6
Those kind of errors can be triggered by faulty/out of position break light switch, which is behind brake pedal. Posted by Ap0qalypto on 07 July 2024 | Relevance: 0.6
Those kind of errors can be triggered by faulty/out of position break light switch, which is behind brake pedal.
Hi, thanks for the info. ... Posted by Retroman on 24 July 2024 | Relevance: 0.6
I have also changed break light switch on mine. And I would occasionally get those error codes during the drive. I went to my mechanic, he positioned ... Posted by Ap0qalypto on 24 July 2024 | Relevance: 0.6
Looks like a faulty break light switch or temperature sensor. If there is no warning/error codes i would not worry much Posted by Ashwinher on 17 January 2019 | Relevance: 0.6
As part of thread: Rear Parking Sensors Not Working.
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb