...thing. Only stops, when I switch it totally off. I checked all doors but they were closed. So could someone please help what this phenomena is? Posted by basy on 23 September 2013 | Relevance: 0.6
...rd party unit, which works fine with the steering controls etc. however I was missing the Dark function which is on the old HU. I know this can be pro... Posted by maui on 24 September 2013 | Relevance: 0.6
...on with the BSI ECU
Fault reception
P1693 Controlled engine starting and stopping : Starting or stopping requests absent or not valid
Not d... Posted by sciamo on 28 September 2013 | Relevance: 0.6
Initial request...if possible, how can I switch/disable these temporarily. For example if i'm in stationary traffic I don't need them bleeping every t... Posted by belfix on 02 October 2013 | Relevance: 0.6
According to the handbook it says that you can switch between Auto and manual mode at any time. Does this mean you can do it while driving?
Regards ... Posted by scarbro on 06 October 2013 | Relevance: 0.6
...essage. The handbrake is working when you hit the switch but it seems as though the system isn't recognizing that the handbrake is on. I tried it this... Posted by anduffell on 11 October 2013 | Relevance: 0.6
...need to pry off or just use some force? I am trying to get to the lock/micro switch as one of them is faulty I believe. This is for a 2010 C4GP. Posted by Blader1611 on 13 October 2013 | Relevance: 0.6
...
The cabin heating is controlled by a computer? This is necessary to teach the computer to new thermostat is in the car?
What can I do?
Posted by vjames51 on 20 October 2013 | Relevance: 0.6
...ivers wiper was damaged and I had a booking for a Control Technique (French MOT) this afternoon.I will probably take them back and tell them I made a ... Posted by Jonzjob on 21 October 2013 | Relevance: 0.6
...eplaced the BPGA unit, can anyone tell me more about said unit and what it actually controls, I am struggling to find any information about it. Posted by imriecm on 24 October 2013 | Relevance: 0.6
... reading on here realised it was the brake master switch (or something like that). So i got that part replaced and all was great for about 2 months. T... Posted by funky-1 on 29 October 2013 | Relevance: 0.6
...x faulty, parking brake faulty-dash shows car has switched out of auto box mode. Pull over and stop, turn off ignition, turn back on and start, faults... Posted by passat07 on 29 October 2013 | Relevance: 0.6
...without lexia system?
Is there a safe guard on the compressor to switch it off if it feels its being over worked and this just needs reset? Posted by resolutionuk on 01 November 2013 | Relevance: 0.6
...he lamps, but the o/s side lamp does not come on; switched lamps and holders but to no avail. I've looked in the owners manual to see if there was a s... Posted by Greenday on 03 November 2013 | Relevance: 0.6
...t starting.
He diagnosed a faulty ignition switch but I'm not convinced. Any more ideas?
The car is a 05 2.0 HDi fap coupe
Thanks Posted by bengildea on 04 November 2013 | Relevance: 0.6
...between 10 miles and 80, so the engine is warm) I switch the engine off, remove the key and then (for whatever reason) I need to re-start the car and ... Posted by Dibble on 07 November 2013 | Relevance: 0.6
...on which must mean that when you park the car and switch it off, it is held in a stationary position by the handbrake only? Or, as the gearbox is esse... Posted by KingsleyB on 10 November 2013 | Relevance: 0.6
...n anyone confirm this? Also, I'll need to get the control box hidden away behind the dash. Anyone removed the glove box? Found 4x Torx screws inside w... Posted by RochdalePioneers on 12 November 2013 | Relevance: 0.6
...rs.
Before I start looking into the pressure switch or alternator. I was wondering if anyone may have had a similar experience or could shed some... Posted by danherts on 13 November 2013 | Relevance: 0.6
As part of thread: Interior lights blinking
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb