...p opening.
On mine it just says Emissions control additive range greater than 1500 miles until it gets low then starts a countdown and lights ... Posted by Wutang on 28 January 2022 | Relevance: 0.6
...rted them here
Agreed.
For B1223, Google gave me a Climate Control Unit fault.
A PSA B1223 fault code relates to the EGR sensor.
Posted by BigJohnD on 19 January 2020 | Relevance: 0.6
...rmal temp to 530 degrees, the glow plug relais is switched on and blower also.
After refill the additive i have reset the counter, removed the fu... Posted by steve233 on 30 August 2016 | Relevance: 0.6
...her useless because a) the dashboard illumination switches to night mode, and b) the auto headlamps won't be operational.
So, have any of the guy... Posted by Ivan_C4P on 30 January 2011 | Relevance: 0.6
...ment/406/1296495065_406_FT78532_drl_001_.jpg
Switch to side lights, the LED's reduce slightly all other lighting comes on, internal and rear ligh... Posted by Phil on 31 January 2011 | Relevance: 0.6
Right some pictures for you:-
Headlights off, so DRL's on full intenisty - no rear lights.
Pic
Switch to side lights, the LED's redu... Posted by Ivan_C4P on 31 January 2011 | Relevance: 0.6
Yes - it'll change it to work as per my last post on the previous page. :)
Light switch in off position - Just LED's at full intensity
Sidel... Posted by Phil on 15 February 2011 | Relevance: 0.6
...nt. The DRLs act as parking lights but to get them to work, you have to switch the lights off when you park, and then switch them back on again. Posted by routemaster1 on 14 March 2011 | Relevance: 0.6
... If I remember correctly, it was also possible to switch the lights to permanently on through the menus.
The simple solution is just to leave th... Posted by routemaster1 on 20 February 2013 | Relevance: 0.6
Anyone know a good area to tap into the 12 volt supply as above please ( avoiding the ECU )?
Switched? For DRLs?
Posted by BigJohnD on 25 February 2013 | Relevance: 0.6
...e and restarted.
Yes Wunny probably computer controlled as well! I've had the car a fortnight and only found the coolant and oil temp gauges buri... Posted by JKPORTLAND on 14 October 2016 | Relevance: 0.6
...e and restarted.
Yes Wunny probably computer controlled as well! I've had the car a fortnight and only found the coolant and oil temp gauges buri... Posted by always_happy on 23 October 2016 | Relevance: 0.6
...e and restarted.
Yes Wunny probably computer controlled as well! I've had the car a fortnight and only found the coolant and oil temp gauges buri... Posted by JKPORTLAND on 25 October 2016 | Relevance: 0.6
... iPod is charged, the sound is very good and it's controlled from HU and/or the steering wheel. Probably the biggest recommendation is that my parasit... Posted by BigJohnD on 10 April 2010 | Relevance: 0.6
Ok, well that's a step in the right direction then, now I know something's wrong and it's not a feature I can switch off. So, I assume it involves tak... Posted by Anodizedgold on 05 August 2012 | Relevance: 0.6
...om of these problems? I've read and been told it can be a break in the wiring loom between door and body, or the door control module is faulty. Posted by TVRV8S on 22 October 2019 | Relevance: 0.6
...e symbol turns blue.
So when the auto lights switch on the headlights they start on dip beam. If you pull the lever towards you the auto main bea... Posted by routemaster1 on 23 November 2021 | Relevance: 0.6
... with this.
But that can't be the case when you switch off the ignition so why doesn't it engage the brake then?
And also if the EGR valve fails s... Posted by AndySample on 10 June 2015 | Relevance: 0.6
I think the auto handbrake release is controlled by the accelerator pedal position sensor as I can tap the pedal & the brake will release. Also th... Posted by rusky on 10 June 2015 | Relevance: 0.6
I've just been through this. First step was to replace the brake switch, but to no effect. Second step was to remove fuse one from the engine bay pa... Posted by Jimux on 10 June 2015 | Relevance: 0.6