Citroen did replace the electro switch in the gear box last month and replaced the gear box oil with it.
The engine just seems to have lots of n... Posted by Keeny1975 on 01 March 2015 | Relevance: 0.6
...ehind the dashboard as in the back of the heater controls when the engine is running, i can only describe it as something bouncing around haha. Posted by trisscott77 on 15 January 2014 | Relevance: 0.6
If you use one of the tests on a fresh can of oil as your control and keep the record for when you test the used oil from the car...and realise the te... Posted by Rich_Eason on 05 July 2013 | Relevance: 0.6
If you use one of the tests on a fresh can of oil as your control and keep the record for when you test the used oil from the car...and realise the... Posted by dino77saurus on 08 July 2013 | Relevance: 0.6
Think you better get the engine checked. It might be a faulty oil pressure switch or real low oil pressure.
as there is no pressure indication other... Posted by wilcovh on 16 April 2014 | Relevance: 0.6
...ith oil.
Yes, the stick is inserted fully, and you need to wait at least fifteen minutes after switching off the engine to check the level. Posted by Jimux on 08 April 2017 | Relevance: 0.6
...gine to more than 2k RPM.
When I stopped and switched engine off, the automatic handbrake did not engage. It did engage manually after I turned ... Posted by Ballistic on 17 December 2011 | Relevance: 0.6
...used the handbrake for a while. It can be hard to control when trying to do clutch control rather than relying on the hill assist or just sitting in t... Posted by dalove on 04 September 2015 | Relevance: 0.6
...he pulsating idle when hot, combined with hesitation on throttle application, often points to instability in the closed-loop control system.
Posted by Nickbrown123 on 15 November 2025 | Relevance: 0.6
Do you get in and turn the key right round to "start" immediately? Or switch on and wait 10-15 seconds until all the pre-flight checks are complete be... Posted by BigJohnD on 16 February 2016 | Relevance: 0.6
...ging tend to be the ones that have failed quality control. It is really worth getting one from a reputable source or having your existing turbo rebuil... Posted by TriumphGuy on 09 March 2017 | Relevance: 0.6
...ging tend to be the ones that have failed quality control. It is really worth getting one from a reputable source or having your existing turbo rebuil... Posted by routemaster1 on 09 March 2017 | Relevance: 0.6
...ensor heating control - Permanent fault
B1505(13) - Fault - microphone input.
These are the all error codes I have with my car.
Posted by wrathgor on 04 September 2021 | Relevance: 0.6
Booked in for first thing Tuesday.
Service guy asked: Have you started the car this morning? I said no. He said, switch the ignition on, wait u... Posted by BigJohnD on 04 July 2014 | Relevance: 0.6
...; the engine continues to run at idle until it is switched off ; when starting a warm engine : normal operation
Although to check that I'll have to ... Posted by Biohead on 10 January 2012 | Relevance: 0.6
...oned by Harsh187 it was indeed a faulty emissions control system (Adblue tank and related components). Dealership said it is classified as a recall wo... Posted by Duck999 on 20 June 2017 | Relevance: 0.6
...p with Shell's 3.5L AdBlue bottle with open/close switch - was super easy! The bottle's opening fits perfectly into the tank. Now no more urea light :... Posted by Duck999 on 15 August 2017 | Relevance: 0.6
...nt, and basically no more normal driving in auto, switch to manual and hold it in lower gears always around 2000rpm etc, and keep doing that til the s... Posted by pedal on 23 April 2012 | Relevance: 0.6
As part of thread: Engine sounds like it's over revving.
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb