Sorry, I'm not clear on something here. You say the passenger's side light wasn't working, but when you switched the bulbs the passenger's side worked... Posted by routemaster1 on 05 November 2019 | Relevance: 0.6
Sorry, I'm not clear on something here. You say the passenger's side light wasn't working, but when you switched the bulbs the passenger's side wor... Posted by FireWalker on 05 November 2019 | Relevance: 0.6
Are you sure you have the correct Connects2 adaptor? That looks like a generic one to me. http://www.connects2.com/products/steering-wheel-control-i... Posted by BigJohnD on 06 April 2017 | Relevance: 0.6
...s2 to confirm the adaptor and the brand specific patch lead to enable use of the steering wheel controls. Don't forget the aerial adaptor lead. Posted by BigJohnD on 20 July 2017 | Relevance: 0.6
...tlink Kenwood for more info.
Do the steering wheel controls still work?
And did you get the Fakra to ISO or DIN aerial adaptor?
Posted by BigJohnD on 02 January 2011 | Relevance: 0.6
I had a similar problem when fitting a pioneer unit into my daughters ibiza, except hers wouldn't switch off, it turned out the normal adaptor lead is... Posted by trev h on 02 January 2011 | Relevance: 0.6
Finding a switched ignition by the radio is not easy, and cutting into one of the wires with the quadlock connector on the end is not recommended.
... Posted by BigJohnD on 03 January 2011 | Relevance: 0.6
... know where to start:
No static steering wheels control.
Different shaped doors apertures.
Different seats.
Very different keys and keyholes o... Posted by BigJohnD on 26 April 2011 | Relevance: 0.6
...o 5 mins to run.
5. Select Diesel Fuel Additive Control unit.
6. Select Configuration.
7. Select Cleaning or replacement of DPF.
8. Note the n... Posted by vincentfishing on 04 March 2022 | Relevance: 0.6
...rness meant I could operate it using the steering controls.
MiniPaulo has it in his coupe now. Still working as far as I know.
Did you read ... Posted by Jips on 20 May 2012 | Relevance: 0.6
...
A complete waste of time and money, I later put a factory look like off ebay, with a independent switch which worked a treat.
Barrie Posted by barrie on 26 January 2015 | Relevance: 0.6
... a factory look like off ebay, with a independent switch which worked a treat.
Barrie
Interesting, what was it that was so bad? Did it just ... Posted by bencordy on 26 January 2015 | Relevance: 0.6
Does it make a rattly noise on start-up (when warm) and when switching off, as well as a lot of clutch judder on take-up? If so, then it's a gearbox/e... Posted by on 10 November 2009 | Relevance: 0.6
...e Ciggie lighter socket wiring, which is ignition controlled, and fed the extension under the carpet into the recess under the dash.
I then used ... Posted by Jips on 14 October 2011 | Relevance: 0.6
...e Ciggie lighter socket wiring, which is ignition controlled, and fed the extension under the carpet into the recess under the dash.
However, tha... Posted by Commodore on 14 October 2011 | Relevance: 0.6
...ions on which of the fuses in the glove box are ignition switched and capable of carrying the additional load for the tap would be a great help. Posted by Commodore on 14 October 2011 | Relevance: 0.6
...to check if anyone knows whether this is ignition switched at the fuse box point or further down the line?
Ideally, I don't want to tap into som... Posted by Commodore on 21 October 2011 | Relevance: 0.6
Well I picked up a 312gw memory card and hardwired kit from Halfords and had some luck on the switched live. There was already a piggy back fuse in s... Posted by byngo on 03 December 2017 | Relevance: 0.6
...ter still fit this devise which will allow you to control a number of devises and usb's at a touch of a button {e_PLUGIN}forum/attachment/20936/1593... Posted by iscom on 01 July 2020 | Relevance: 0.6
As part of thread: Head Unit side buttons not working
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb