Hi, my driver window switch is not working and outside air ambient temperature neither the mirror. Any suggestion? Posted by RajivNundran on 14 October 2022 | Relevance: 0.6
Hi lauren, usually the window switch is fixed with a spray of contact cleaner (not WD40) try first just spraying around the switch if no good remove t... Posted by FakeConcern on 03 February 2014 | Relevance: 0.6
Earth is fine, I've checked. Can't find the positive wire though. Mirror control is working but the heating and turn signal aren't. The pudle light or... Posted by paslepinskas on 02 April 2019 | Relevance: 0.6
...the outer edge with one in the pull handle in the switch unit.
After that, just start by giving it a hard tug at the bottom and working up to rel... Posted by Dave_Retired. on 10 October 2010 | Relevance: 0.6
The seat belt pre-tensioned seat belt stalks can be a problem. First disconnect the battery, turn the light switch on and turn the key to start pos... Posted by on 12 December 2010 | Relevance: 0.6
I have the same problem, but I don think it is the switch as I have stripped it down and cleaned it with switch cleaner. There was no sign of corrosio... Posted by amac31 on 21 May 2016 | Relevance: 0.6
I had the drivers switch replaced under warranty & it cured it for a bit but the fault still shows up every so often. I think it may be moisture r... Posted by rusky on 21 May 2016 | Relevance: 0.6
...ork us something plastic to lift out the switch panel and spray connectors with wd40! These cures only last a short time but are worth knowing. Posted by KenC on 21 May 2016 | Relevance: 0.6
That doesn't sound good. You may have to force the door card off to get access. The only screw you can get to is the one in the door pull switches and... Posted by Dave_Retired. on 02 November 2015 | Relevance: 0.6
Thanks for that suggestion, I'll check out what the handle is doing and hopefully it's that and not the micro switch. Posted by on 10 January 2012 | Relevance: 0.6
Anybody has idea how to master reset a/c climate control on C4P? I believe it involves holding 3 keys, but I cant find which one's.
Cheers Posted by Ap0qalypto on 07 November 2020 | Relevance: 0.6
...you
It is number 3. Just drive up to a wall, switch on the lights and try the adjuster.
It is a legal requirement to carry an in date breath... Posted by routemaster1 on 19 July 2017 | Relevance: 0.6
...is running and ventilation is not turned off.
Grey connector supply power to the blower, while small black one supply control signal.
BR Posted by rafiki on 10 December 2015 | Relevance: 0.6
...power to the blower, while small black one supply control signal.
BR
Thanks rafkiki. Mine definitely show no signs of power. Anyone have sug... Posted by oscarlab on 10 December 2015 | Relevance: 0.6
...r and everything worked perfect. (fan speed. temp control).
thinking of bypassing original plug with new live wire. so looking for any advice on how... Posted by oscarlab on 17 December 2015 | Relevance: 0.6
Sorry it didn't work for you, mine still working after about 3 weeks!
With the engine running and radio off if you change control settings ie fan sp... Posted by KenC on 17 December 2015 | Relevance: 0.6
As part of thread: Driver's window switch
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb