It may well be possible to replace with ordinary struts, but there may be issues with the electric control system. It may be possible to disable the s... Posted by routemaster1 on 01 May 2021 | Relevance: 0.6
Check ebay for the entire assembly or boot contact switch 8726V7 6554ZZ.
Video on youtube should you need it https://youtu.be/F4S9EnhmcL0 Posted by SPC on 17 June 2017 | Relevance: 0.6
...r diesel. may have been only a momentary feeling, switching from croatian diesel to the new stuff *-)
i do have a feeling though the fuel here ... Posted by dino77saurus on 25 July 2012 | Relevance: 0.6
Sounds like a brake pedal switch issue, the same as the Coupe and Hatch's get
I have had a few similar issues on the C6 and the switch is a commo... Posted by Dave_Retired. on 11 April 2011 | Relevance: 0.6
Sounds like a brake pedal switch issue, the same as the Coupe and Hatch's get
I have had a few similar issues on the C6 and the switch is a co... Posted by on 11 April 2011 | Relevance: 0.6
Got car back today and they have changed the ABS switch and wiring loom and strangly a new passenger door lock Posted by on 15 April 2011 | Relevance: 0.6
yes changed my switch budgens telford citroen no good for parts went to peugeot telford motors same part number as citroen fitted as per pictures on ... Posted by scarab on 15 April 2011 | Relevance: 0.6
Ok..so mines now started with this error (as described in this thread and others).Please, any body with these instructions and locations of switch and... Posted by okeydokey on 28 June 2010 | Relevance: 0.6
Part numbers are:
6582GA Addition Loom
453463 Switch-Brake
Or 453467 for the kit combined. - £3.50 cheaper. Every little helps as... Posted by Phil on 28 June 2010 | Relevance: 0.6
... before and it can interfere with the switch if you're not careful. They would also charge half hour labour if they were to fit. Hope this helps Posted by on 03 June 2011 | Relevance: 0.6
I have the same problem with my C4 Picasso, 2007. The switch doesn't appear to be in the location specified in the instructions. Does anyone have any ... Posted by on 28 March 2012 | Relevance: 0.6
Hi Jerrybuilt,
I also have 2007 C4 GP. Been looking for this switch for a few days and have just discovered it! The photos in other threads omit ... Posted by on 28 March 2012 | Relevance: 0.6
Hi Jerrybuilt,
I also have 2007 C4 GP. Been looking for this switch for a few days and have just discovered it! The photos in other threads om... Posted by Ham on 30 March 2012 | Relevance: 0.6
omg, wait a minute are you saying you simply plug the harness/loom *Between* the already existing cable and the switch...it doesn't actually replace a... Posted by wired00 on 04 February 2013 | Relevance: 0.6
...e the handbrake manually. I have bought the brake switch (453466) for £20 which comes with loom.
My question is, after replacing the switch and... Posted by Battenburg on 05 September 2015 | Relevance: 0.6
Simply replace the existing switch and wiring loom with the new one.
That's it.
Fault log may still show an error unless the battery is disc... Posted by Dave_Retired. on 05 September 2015 | Relevance: 0.6
...he RHS of display panel.
Replacing the brake switch with the new switch and loom has not worked. Disconnecting the battery for 10mins and then re... Posted by Battenburg on 05 September 2015 | Relevance: 0.6
As part of thread: Broken automated boot strut - Grand C4 Picasso
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb