... a sudden my radio stopped playing, the navidrive switched itself off and my speedo changed to kmph. There was also a small red light showing on my ra... Posted by Panda on 02 September 2013 | Relevance: 0.6
There are 2 sensors to control the auto leveling function of the xenon headlights. One is at the front, the other is attached to the rear axle towards... Posted by wozza on 21 July 2012 | Relevance: 0.6
... not much though. Have you tried it with the ESP turned off as that seems to change all sorts of things not only traction control at low speed? Posted by FakeConcern on 22 July 2012 | Relevance: 0.6
There are 2 sensors to control the auto leveling function of the xenon headlights. One is at the front, the other is attached to the rear axle towa... Posted by planet_saxx on 22 July 2012 | Relevance: 0.6
...ot only traction control at low speed?
i will try fiddling the esp on and off ;)
i think i will stick with a uprated panel filter. Posted by planet_saxx on 22 July 2012 | Relevance: 0.6
...dels and VTS Diesel all reengage ESP @30mph after switching off.
I might be confusing myself with the TTC set up on my Abarth, but IIRC by turnin... Posted by Rich_Eason on 26 July 2012 | Relevance: 0.6
I have heard of people fitting after market heating elements into C5 leather seats & using the original wiring & switches, it may be the same ... Posted by FakeConcern on 21 December 2015 | Relevance: 0.6
...
With my DS4 the windows will open using the door switches for a while after the engine is turned off, but not long.
Can you open the windows using ... Posted by neilp on 21 January 2025 | Relevance: 0.6
I am in the process of switching the bulbs over at the moment to see if it is the bulb, I am not sure how to remove it from the silver thing it sits i... Posted by LewisR on 23 April 2011 | Relevance: 0.6
...he inlet manifold.
found it by hearing a very slight hiss on tick over.
Replaced the pipe and it cruised smoothly.
hope it helps. Posted by spizlot3 on 19 July 2012 | Relevance: 0.6
The C6 has a switch to turn front and rear sensors off, pity the C4 didn't so you could simply switch them off when the tow hook is in. Posted by Dave_Retired. on 04 November 2009 | Relevance: 0.6
They do have switches to turn them off. Front and rear are separate switches. To be fair, you would have to turn them off if you have the tow hook on ... Posted by wozza on 04 November 2009 | Relevance: 0.6
Hi, ive had the same problem in the past, and all it is is the brake light switch at the pedal, just replace it
hope it sorts it Posted by Ham on 18 May 2009 | Relevance: 0.6
found this on the net , might help out
http://www.bba-reman.com/content.aspx?content=citroen_bsi_body_control_failure Posted by on 04 June 2012 | Relevance: 0.6
Looking at the parts list the control module is either pre configured to the cars vin on order, or you can get one un configured.
Whether you can... Posted by Dave_Retired. on 23 March 2013 | Relevance: 0.6
...ghtly different to the RD4 (my rt4 has a few lives switched). The RD4 should work straight off with the correct adaptor, not too sure on the rt3 Posted by Biohead on 04 May 2010 | Relevance: 0.6
...parking sensor connector as well and then be able to fit my pioneer stereo. i wouldnt need the autochanger as my pioneer has full ipod control. Posted by on 04 May 2010 | Relevance: 0.6
Click the arrows for the correct parts.
Quadlock to ISO and Steering control adaptor.
http://caraudiosecurity.com/shop/product/products_id/8670... Posted by wozza on 04 May 2010 | Relevance: 0.6
...s computer could not comunicate with the bit that controled the fuel additive. So, your post would make sense. The regeneration is obviously not doing... Posted by on 07 July 2011 | Relevance: 0.6
As part of thread: C4 VTS multiple hard disk checks and speedo changing mph - km/h
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb