...t to open it!
I have since replaced the microswitch and boot lock. Neither have fixed the issue.
I then back to reading through all the various... Posted by TableLeg on 08 June 2014 | Relevance: 0.6
...d it, but basically i got some contact cleaner from maplin and cleaner the micro switch which open the boot, done this and the problem was fixed Posted by craig573 on 17 February 2012 | Relevance: 0.6
...contact cleaner from maplin and cleaner the micro switch which open the boot, done this and the problem was fixed
ok chris cannot find the thr... Posted by craig573 on 17 February 2012 | Relevance: 0.6
Thank's for your reply Craig, I've had a look at the loom and that looks fine. Ill try spaying the microswitch tomorrow, if that doesn't work would it... Posted by on 17 February 2012 | Relevance: 0.6
Thank's for your reply Craig, I've had a look at the loom and that looks fine. Ill try spaying the microswitch tomorrow, if that doesn't work would... Posted by craig573 on 18 February 2012 | Relevance: 0.6
Can anyone point out a guide for getting at the microswitch please? I have exactly the same problem (although my car is due the rear harness recall) a... Posted by Potentiale on 06 March 2012 | Relevance: 0.6
...ith the lifting hand nowhere near the handle microswitch) which makes me think it must be the flexing of the wires in the rubber gaiter that's causing... Posted by Bryn on 08 March 2012 | Relevance: 0.6
...one that before the work is done? I won't know for definite whether the issue is wiring or switch until the garage has looked at it on Tuesday. Posted by Bryn on 09 March 2012 | Relevance: 0.6
...s a recall for my car.
I have checked the micro switch, and that`s OK.
I`ve also unplugged the wiper but the lock still doesn`t work. Point tak... Posted by okeydokey on 22 May 2012 | Relevance: 0.6
...wdriver etc into the manual hole).
The micro switch failed on my boot a couple of years ago and I can guarantee you that I never needed the ignit... Posted by CamM on 22 May 2012 | Relevance: 0.6
...wdriver etc into the manual hole).
The micro switch failed on my boot a couple of years ago and I can guarantee you that I never needed the ignit... Posted by okeydokey on 22 May 2012 | Relevance: 0.6
Only place to get a new switch is a Citroen or Peugeot dealer.
Someone else has just changed one so look in the Picasso forums on site for the in... Posted by Dave_Retired. on 29 May 2011 | Relevance: 0.6
Mines' a hatchback and dealer have replaced the boot lock and switch at £108 and still no joy.
Phoned CUK this morning and they have given me a Cas... Posted by Grumpy GrandPa on 18 April 2011 | Relevance: 0.6
yes it is relatively easy :)
so guys and ladies, what happens if I have replaced the handle and the microswitch and the boot still remains locked. ... Posted by on 20 May 2011 | Relevance: 0.6
|know it sounds obvious, but is the plastic flap you touch pressing on the microswitch all the time? The springiness on the flap goes with age and tha... Posted by FakeConcern on 10 April 2018 | Relevance: 0.6
|know it sounds obvious, but is the plastic flap you touch pressing on the microswitch all the time? The springiness on the flap goes with age and ... Posted by riven1962 on 11 April 2018 | Relevance: 0.6
With mine it wasn't the microswitch or lock motor, it was the wiring loom fraying apart inside the cable tube between the hatch and car body. Posted by Mortimer on 15 April 2018 | Relevance: 0.6
|know it sounds obvious, but is the plastic flap you touch pressing on the microswitch all the time? The springiness on the flap goes with age and ... Posted by riven1962 on 20 April 2018 | Relevance: 0.6
|know it sounds obvious, but is the plastic flap you touch pressing on the microswitch all the time? The springiness on the flap goes with age a... Posted by FakeConcern on 20 April 2018 | Relevance: 0.6
As part of thread: Boot lock wont unlock
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb