... in the vehicle, all electrical consumers must be switched off before connecting the charger. The charger must be connected to the battery before it i... Posted by stevjull2017 on 04 January 2021 | Relevance: 0.6
...ith the car.
Dave
Just move the adjustment selection switch to the middle. If it is set to left or right the selected mirror will dip. Posted by routemaster1 on 21 July 2012 | Relevance: 0.6
...edal
3. Press and release handbrake switch
4. Release brake pedal
This will disable parking brake until next engine switch-off.
BR Posted by rafiki on 29 March 2012 | Relevance: 0.6
There is a difference between the procedure outlined by rafiki and that which I posted. Rafiki's procedure will switch the parking brake to the 'norm... Posted by Jimux on 29 March 2012 | Relevance: 0.6
Mine's a GP 2009 '59 plate. To switch mine off there's nothing in the menu, you switch ignition on, put footbrake on then pull the button. Posted by PontyAl on 31 March 2012 | Relevance: 0.6
...n't have anything on the menus but I can do it by switching ignition on, pressing footbrake, then releasing handbrake so at least I have a method.
... Posted by russ_g_uk on 01 April 2012 | Relevance: 0.6
... other issues. It would also bypass the ignition switch so you would have to be very careful not to leave the radio on 'forever'. If that happened t... Posted by Richard_C on 12 September 2020 | Relevance: 0.6
...although the brightness is reduced when the light switch is in the sidelight position. On the previous version it was possible to disable the DRLs thr... Posted by routemaster1 on 20 May 2015 | Relevance: 0.6
...re operating equipment inside the car it helps to switch off as much of the car equipment as possible. Fine if it's a warm evening, no problem. We can... Posted by ignorance-is-bliss on 20 May 2015 | Relevance: 0.6
...is is done for safety, as it was on my Megane. But there was a way of disabling this on the Megane and switching all the external lighting off. Posted by ignorance-is-bliss on 20 May 2015 | Relevance: 0.6
As a Ham you would be experienced in electronics etc so would be an easy job for you to wire in a a switch in the DRL circuit.
Tom Posted by tomandjo2 on 20 May 2015 | Relevance: 0.6
...sition as it stands. If your not preared to fit a switch (I wouldn't either BTW) then your only option is via the BSI using Lexia/Diagbox and I suspec... Posted by Dave_Retired. on 21 May 2015 | Relevance: 0.6
...I think the stop-start can be disabled but only temporarily until the engine is switched off. It will re-activate when the engine is re-started. Posted by BigJohnD on 09 March 2020 | Relevance: 0.6
...disabled but only temporarily until the engine is switched off. It will re-activate when the engine is re-started.
This is true. Others have aske... Posted by routemaster1 on 09 March 2020 | Relevance: 0.6
...h the directional beam regs as the car is! When I switch the lights on they are momentarily in the high position before setting to their current low l... Posted by Daveperce on 16 January 2011 | Relevance: 0.6
When I switch the lights on they are momentarily in the high position before setting to their current low level.
Is this an indication that I... Posted by Rich_Eason on 16 January 2011 | Relevance: 0.6
...ion.
I much prefer to be in total control. And please believe me, I am not one of those pillocks who only flashes once to change lane.
Posted by Paperhouse on 21 July 2010 | Relevance: 0.6
...e the function.
I much prefer to be in total control. And please believe me, I am not one of those pillocks who only flashes once to change lane... Posted by Dave_Retired. on 21 July 2010 | Relevance: 0.6
...gested perhaps the flasher unit and Phil confirmed that there isnt one and its all controlled by the BSI. Perhaps a reflash might be in order? Posted by Rich_Eason on 24 February 2010 | Relevance: 0.6
As part of thread: Disconnecting battery Grand C4 Picasso 1st Generation 2.0 HDiF Exclusive
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb