Luke, mine is a hatch. Did you read my query re the socket type, probably clutching at straws re 13 pin/7 pin micro switch thingy.
Regards
G Posted by gmerry on 05 November 2011 | Relevance: 0.6
Yes I did. Playing around I have found the problem. Removed glovebox and found the five wires that connect to towbars control unit I.e the yellow, red... Posted by lukeos24_7 on 05 November 2011 | Relevance: 0.6
... sensor switch, fuel cap opener etc).
The birthdate of my car is showing as 23/03/2033 on the spreadsheet so not sure what is going on there . Posted by miyagi on 28 March 2014 | Relevance: 0.6
They will pickup the swan neck, the switch is in the electric socket that turns the sensors on or off when trailer electrics are attached. Posted by Ham on 29 April 2015 | Relevance: 0.6
They will pickup the swan neck, the switch is in the electric socket that turns the sensors on or off when trailer electrics are attached.
@ar... Posted by Dave_Retired. on 30 April 2015 | Relevance: 0.6
...es, however the software programmes for stability control were subsequently improved by Citroen.
Your reading information from several years ago ... Posted by Dave_Retired. on 30 September 2011 | Relevance: 0.6
...o switch off the parking sensors assuming that they would actually do it for me.
So all in all get it done properly (in my humble opinion!) Posted by DLJ on 06 October 2011 | Relevance: 0.6
In the service they told me that trailer light unit is activated from the system. Parking sensors are switched off when trailer plug is connected. Lef... Posted by a72 on 05 June 2020 | Relevance: 0.6
... no idea of the relay switching peak voltages being fed back into the car's wiring and the potential damage that this can cause the various ECUs Posted by gmerry on 03 April 2017 | Relevance: 0.6
Finally found it is pin 2 on the stop lamp switch I need to connect to anyone know what colour it would be? Posted by Speedcat445 on 23 June 2013 | Relevance: 0.6
..."DD" on the end of the wire that goes to the rear control box (Ref "96 756698 80 A 01") mates to, but I can't find this white socket in my fusebox! B... Posted by alfsgc4p on 27 July 2013 | Relevance: 0.6
...rnal fuse box that is behind the glove box to the control box in the rear), is specific to late build models only and cannot be used to wire up my car... Posted by alfsgc4p on 30 July 2013 | Relevance: 0.6
...g O. This is the main positive power feed to the control box.
The thin purple and yellow wires which were bundled together with the thick whit... Posted by alfsgc4p on 02 August 2013 | Relevance: 0.6
...aced it. Then once he could read the cars BSI he switched the towbar wiring on.
He told me that he had tested the towbar socket by plugging it into... Posted by alfsgc4p on 29 August 2013 | Relevance: 0.6
The sensors can be switched off using the switch situated down near the driver's right knee. Posted by routemaster1 on 02 February 2012 | Relevance: 0.6
...s when it's mounted obviously. It's easy to put a switch in the feed from the reverse lights though, behind the left light cluster if it's the same as... Posted by PontyAl on 04 February 2012 | Relevance: 0.6
...you get the side panel in the boot off! The major control box and wiring all fit in this area. There is no Haynes manual for the post 2013 Picasso and... Posted by cobwebs on 08 May 2017 | Relevance: 0.6
...e Citroen 13 pin Euro socket, there's a mechanical switch to let the car's Canbus know when it's connected to a towed vehicle.
Regards
G Posted by gmerry on 30 July 2011 | Relevance: 0.6
...nd sealed the 3 cables in the boot,and fitted the control box in the wheel well, not that bad, went to the glove box opened it to find fuse box and ne... Posted by evans1029376651 on 30 July 2011 | Relevance: 0.6
As part of thread: Towbar wiring/electrics
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb