The brake light switch was replaced about 12 months ago when i look on diagbox it shows the clutch position as 25% when the clutch is released then wh... Posted by Gtranter1976 on 14 August 2019 | Relevance: 0.6
I've priced the switch (p/n 453463) at the local dealer and it works out at £7.75 including v.a.t, there's also a loom (p/n 6582ga) which is £27.50 ... Posted by Ham on 24 June 2010 | Relevance: 0.6
...69/1277490422_69_FT104225_1a_.jpg
Here's the Switch. i purchased just the switch, but you can get a kit with a new loom which i was told has a re... Posted by Ham on 25 June 2010 | Relevance: 0.6
...e error codes. £33.60. This pinpointed the brake switch at fault (as expected)
As I had left it there for the day, I got them to fit a new switc... Posted by on 06 July 2010 | Relevance: 0.6
The loom goes on the end of the switch!! That's where I connected to anyways! and I've had no problems since fitting both switch and loom! Posted by on 08 July 2010 | Relevance: 0.6
The loom goes on the end of the switch!! That's where I connected to anyways! and I've had no problems since fitting both switch and loom!
... Posted by on 09 July 2010 | Relevance: 0.6
OK see the last pic of the switch ^ unplug it, plug one end of the loom inside it and the other end in the the one you just unplugged! It's a bridge i... Posted by on 09 July 2010 | Relevance: 0.6
May I ask a question?
Is this switch responsible for random EPS/ABS errors? I find that in the hot weather I get these happening quite regularly ... Posted by Mathy on 05 July 2011 | Relevance: 0.6
I too was plagued by the ESP/ABS fault warning light until I read this thread. I got the new switch and loom extension from my Local Citroen dealer fo... Posted by wrinkles on 12 July 2011 | Relevance: 0.6
Having this issue with my car at the moment, will be popping into my local dealer tomorrow afternoon to buy the switch in question. Can I point out fo... Posted by on 01 December 2011 | Relevance: 0.6
Hey guys, I had my brake light switch and loom replaced today in my 2005 C4 VTS, after experiencing an ABS and ESP fault on the dash. Here in Australi... Posted by funky-1 on 03 September 2013 | Relevance: 0.6
...ng that, I got them to replace my brake switch which was bringing up the ABS error and they didn't charge me for labour, so that was OK I guess. Posted by funky-1 on 09 September 2013 | Relevance: 0.6
Hi, thank you very much for the photos.
I've opened the foot well but in my C4 grand picasso it seems different and the switch might be there but... Posted by vandeley on 08 February 2015 | Relevance: 0.6
Yes, the switches were never moved for RHD conversion cars, they stayed in the same place as for LHD cars. i.e. the drivers footwell. Posted by Dave_Retired. on 08 February 2015 | Relevance: 0.6
... seems to be the plastic ratchet which allows the switch to close up. There is a release mechanism made of very poor quality plastic.To release move c... Posted by Solfred on 29 March 2015 | Relevance: 0.6
...
It won't always flash on understeer unless it gets really messy...Understeer is easier for average Jo to control compared to oversteer... Posted by Rich_Eason on 30 December 2009 | Relevance: 0.6
...u should see the ESP light is when the system is taking action to control the car or a part of the system has failed (then the light stays on). Posted by hertsnminds on 08 January 2010 | Relevance: 0.6
...nise a trailer has been connected (using the microswitch on the towbar electric socket)
- tell the car (via the CAN bus) to actually have the TSP... Posted by Ivan_C4P on 01 June 2011 | Relevance: 0.6
As part of thread: ESP/ABS with braking fault 
With Graphics from: Dave Forum Icons by Axialis Emotes by Seb