C4 - DS4 Owners :: Forums :: C4 Picasso and Grand Picasso - PRE 2013 only :: C4 Picasso and Grand Picasso General questions |
<< Previous thread | Next thread >>
|
Where do i find the heater blower on a 2007 C4 Picasso HDi 1.6 - left (steering) |
![]() ![]() ![]() ![]() Please Register to enjoy additional Member Benefits |
Top Thanked Forum Posts: Today | Week | Month | Year | All time | Most Thanks Given: To member | By user
|
Author | Post | ||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
Sorry, my back is bad and i want to match the numbers on the heater blower. I get confused on where to find the whole package - 1) by center post over pedals or 2) behind "glovebox", does that mean the lower one with cooling inside? 3) by center post passenger side I ordered a new fan and regulator but want to make sure it IS the right one... Cheers /Joakim (Sweden) |
||
|
|||
Tobben
![]() ![]() |
|
||
![]() ![]() ![]() Member No: #59394
Joined: Feb 03 2022Location: Norway |
The heater blower is located on the right side of your car. In front of the glove compartment. If I may ask; did your heater blower stop working? The reason why I ask is that I have problems with my heater blower. Its out and I've been testing it and running it directly from a 12V battery. I'm not sure yet but it is probably the resistor that is my problem. |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
Hej Torbjœrn, thank you for the reply. It comes on and off, i have to drive over a speedbump or something like that shaking the car to get it going at all, recently it sounds like rrrrhhrhrrrhhrrhrrrrrhhhhhhhhrrrr before it stops so i think it might be corroded. Not sure so i bought both the fan and the resistor. I seem to be too **** to understand the location, where on earth is "in front of glove ..."? and which one? The top under windscreen (i hear the noise from there?) or the cooled one under the dashboard? |
||
|
|
||
Tobben
![]() ![]() |
|
||
![]() ![]() ![]() Member No: #59394
Joined: Feb 03 2022Location: Norway |
Location is on the right side. Over your passengers feet. You must remove a panel to get to the fan.![]() ![]() |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
Great! Perfect thank you! I read about having to remove the glovebox, this looks much more simple! |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
I got the 2 parts and today i crawled/screwed around to find that the fan was the wrong match, the resistor is smaller than the hole for it in the new fan ![]() So much trouble (for a guy with back problem) for no improvement, the old fan kicks in as soon as i move it so i'm pretty sure that is the problem. |
||
|
|
||
Tobben
![]() ![]() |
|
||
![]() ![]() ![]() Member No: #59394
Joined: Feb 03 2022Location: Norway |
So you think the resistor is the problem? The reason why I ask is that I have the exact same problem with my heater fan. |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
I thought it would be the resistor but no, i put the new one in and absolutely no change. The old resistor looked even more corroded than yours but was not the problem. Now i have ordered the right fan (i hope) and will return the wrong one. |
||
|
|
||
Tobben
![]() ![]() |
|
||
![]() ![]() ![]() Member No: #59394
Joined: Feb 03 2022Location: Norway |
Oh I see.... Did you try to run the fan from a 12V battery? When I do that its working fine. When I connect it to the original cables in the car....nothing happens. There is 12V in the cables and fuses are fine. |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
As i said, if i move the blower (spin the fan it or shake it) it starts, so no, i didn't connect another battery. I'll let you know when i get the new blower if it helps! /J |
||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
Today, finally, i could change the blower and can confirm that in my case it was the blower that was giving up, not the resistor. Now it works again. Do not buy the the Nissens as i did, it fits but the build quality is lousy! Even was cracked on the arched part near the fan motor. It also vibrates a bit more than the Denso that was in there from the start. Reason i choose the Nissens was that it had the wires to connect to the resistor and the one i ordered which didn't fit came with nothing = you'd have to take it apart and solder. |
||
|
|
||
Tobben
![]() ![]() |
|
||
![]() ![]() ![]() Member No: #59394
Joined: Feb 03 2022Location: Norway |
May I ask how much you paid for the blower? | ||
|
|
||
JoaWe
![]() ![]() |
|
||
![]() ![]() Member No: #3494
Joined: Apr 30 2008Location: Rönninge |
Prices change all the time, i paid 1212SEK for this one https://www.autodoc.se/nissens/17228586 | ||
|
|
||
![]() Head Administrator, Administrator, Forum Moderator, Forum Moderator, Premier Member, Technical Expert, New C4 and DS4 Forum Moderators, Member |